...instrukcja serwisowa w pełni czytelna i kompletna. Dziękuję!
Tekstowy podgląd strony 105 (kliknij aby zobaczyć)
Left Side Assemblies
Removal &
Exhaust Fan (FM1)
The Exhaust Fan is located on the left side of the printer, just above the High Voltage Power Supply PCA.
1 Unplug the fan connector from the DC Controller (Figure 6-7, callout 1) and
remove the cable from the (2) clips (Figure 6-7, callout 2). 2 Lift the fan out of its mounting, noting the position of the cabling (attaches to lower left outside of the fan body). NOTE Removal of the Card Cage provides easier access to the connector on the DC Controller PCA, especially when reconnecting (Figure 6-7, callout 1).
Figure 6-7
6fusfan 6fusfanwmf
Exhaust Fan To Reinstall: Make sure that the fan is installed in the correct direction (exhaust, not intake). The cables should be toward the outside.
